main

Tanks

NWP has made some major changes, Our manufacturing has moved to a new Larger building to help us service our customers better.
50 BBL Single Wall
  • 6' H x 7'-8' Dia
  • 3/16" Shell & Roof A36
  • 3/16" Floor A36
  • Thief Hatch, 16 oz pressure, 0.4 oz vacuum
  • Ladder c/w safety hoop
  • 2 - 2" NPT Coupling in shell
  • 1 - 3" NPT Coupling in shell
  • Std level indicator - increment stickers on tank - no gauge board
  • 2 - Lifting Lugs
  • Pneumatic leak test to 16 oz
  • SP7-63 Brush Blast, one coat C-113 phenolic primer on shell and roof.
Options:
  • 1-1/2" or 2" Insulation
  • Heat Coil
  • Firetube
  • Level Indicator w/ gaugeboard
  • Skid
  • Sour service package
  • Paint
  • Envirovault w/Natural Gas Heater
  • Ball Valve, 2" NPT
100 BBL Single Wall
  • 8' H x 9'-6" Diameter
  • 3/16" Shell, Roof and Floor A36
  • 24" x 36" Manway
  • Enardo 330 Thief Hatch
  • Ladder with Safety Hoop
  • 3 - 2" NPT Couplings in shell.
  • 1 - 3" NPT Connection on Roof
  • Lifting Lugs
  • Leak Tested to 16oz
Options:
  • Heat Coil
  • 1-1/2" or 2" Insulation
  • Firetube
  • Level Indicator w/wo gaugeboard
  • Skid
  • Sour service package
  • Paint
  • Envirovault w/Natural Gas Heater
  • Ball Valve, 2" NPT
100 BBL Double Wall Tank
  • 9'-0" H x 9'-0" Dia. Primary
  • 9'-0" H x 9'-6" Dia. Secondary
  • 3/16" Roof and Shells A36 (Common)
  • 1/4" Floor, Primary, A36
  • 3/16" Floor, Secondary, A36
  • 24" x 36" Shell Manway Assembly c/w bolts, nuts & gasket
  • Ladder c/w Safety Hoop
  • Lifting Lugs
  • C1 - 4" NPT Connection - Vent
  • C2 - 1" NPT Connection - Annulus Vent
  • C3A/B - 1/2" NPT Connection - Leak Detection
  • C4 - 1" NPT Connection - Level Indicator
  • C5 - 2" NPT - Drain
  • C6 - 2" NPT Connection - Truck In
  • C7 - 4" NPT Connection - High Level Shut Down
  • C8 - 2" NPT Connection - Annulus Drain
  • C9 - 2" NPT Connection - Truck Out
  • C10 - 2" NPT Connection - Inlet Spare
  • Tank Level Indicator c/w gauge board.
  • Enardo Model 330 Thief Hatch, 16 oz., sweet service.
Options:
  • Heat Coil
  • 1-1/2" or 2" Insulation
  • Firetube
  • Level Indicator w/wo gaugeboard
  • Skid
  • Sour service package
  • Paint
  • Infrared Heater & Enclosure w/ Valves
  • Sight Glass f/ Leak Detection
  • HLSD Switch:
  • Ball Valve, 2" NPT
200 BBL Single Wall
  • 10'-0 H x 12'-0" Dia
  • 3/16" Roof A36, 2:12 pitch
  • 3/16" Shell A36
  • 1/4" Floor A36
  • 1- 24" x 36" Shell Manway Assembly c/w bolts, nuts & gasket
  • 1 - Ladder c/w Safety Hoop
  • 2 - Lifting Lugs
  • 1- Level Indicator, sweet service, increment stickers on tank shell- no guage board
  • N1 - 1-4" 150# RFSO Inlet
  • N2 - 1-3" 150# RFSO HSLD
  • N4 - 1-4" 150# RFSO Truck Out
  • N5 - 1-3" 150# RFSO Drain
  • C1 - 1-4" NPT Std Coupling Vent
  • C4 A/B 2 - 1" NPT Std Coupling Level Ind
  • T1 1- Thief Hatch, 16 oz pressure, 0.4 oz vacuum
Options:
  • 1-1/2" Foam Insulation c/w gauge board
  • 2" Foam Insulation c/w gauge board
  • Heat Coil
  • Firetube & Controls
  • Butterfly Valves
  • Roof Manway
  • Sample Conn. w/ valve
  • Gauge board
  • Sour Thief Hatch & Level Indicator
  • Envirovault w/ Natural Gas Heater
  • Internal Coating
200BBL Double Wall
  • 10"-0 H x 12'-0" Dia
  • Note : Actual Volume is 184 bbl
  • 3/16" Roof A36, 2:12 pitch
  • 3/16" Shell A36 (Double Wall)
  • 1/4" Floor A36 ( Primary)
  • 3/16" Floor A36 ( Secondary)
  • 1 - 24" x 36" Shell Manway Assembly c/w bolts, nuts & gasket
  • 1 - Ladder c/w Safety Hoop
  • 2 - Lifting Lugs
  • 1- Level Indicator, sweet service, with external aluminum gauge board
  • N1 - 1-4" 150# RFSO Inlet
  • N2 - 1-3" 150# RFSO HSLD
  • N3 - 1-2" 150# RFSO Annulus Drain
  • N4 - 1-4" 150# RFSO Truck Out
  • N5 - 1-3" 150# RFSO Drain
  • C1 - 1-4" NPT Std Coupling Vent
  • C2 - 1" NPT Std Coupling Annulus Vent
  • C3 A/B 2 - 1/2" NPT Std Coupling Leak Detection
  • C4 A/B 2 - 1" NPT Std Coupling Level Ind
  • T1 1- Thief Hatch, 16 oz pressure, 0.4 oz vacuum
Options:
  • 1-1/2" Foam Insulation c/w gauge board
  • 2" Foam Insulation c/w gauge board
  • Heat Coil
  • Firetube & Controls
  • Butterfly Valves
  • Roof Manway
  • Sample Conn. w/ valve
  • Gauge board
  • Sour Thief Hatch & Level Indicator
  • Envirovault w/ Natural Gas Heater
  • Internal Coating
400 Bbl Single Wall, Skidded, Flat Bottom
  • 12'-0" diameter x 20'-0" high
  • 3/16" Shell & Roof A36
  • 1/4" Floor A36
  • Enardo Model 330 Thief Hatch
  • Ladder c/w Safety Hoop
  • 4 - 4" 150# RF Connection - Truck Out
  • 3" 150# RF Connection - Drain
  • 3" NPT Recessed - API Steel Coupling Connection on Roof - Vent
  • 1" NPT - Level Indicator
  • 3" 150# RF Connection - HLSD / Spare
  • Std. Service Pulley System (increment stickers on tank - no gauge board)
  • 3" Downcomer
  • Skid, Constructed of 8" wide flange beam uprights; 6" wide flange base
  • Manway 24" x 36" x 3/16", c/w gasket, nuts and bolts
  • Roof safety toe ring
  • SP 7-63 Brush Blast (1) coat Cloverdale-Clovacoat C-113 Phenolic Primer - Grey in color
  • Pneumatic leak test to 16 oz.
Options:
  • 1-1/2" Foam Insulation c/w gauge board
  • 2" Foam Insulation c/w gauge board
  • Heat Coil
  • Firetube & Controls
  • Butterfly Valve
  • Roof Manway
  • Sample Conn. w/ valve
  • Gauge board
  • Sour Thief Hatch & Level Indicator
  • Envirovault w/ Natural Gas Heater
  • Internal Coating
  • Envirovault, 5' x 5', Weld-In
  • Heater for 5' x 5' Envirovault
  • Caged Safety Ladder
  • Fall Arrest System
400 BBL Double Wall, Skidded
Note: Actual volume is 365 bbl.
  • 12'- 0" Dia. x 20'- 0" high ( outer shell )
  • 3/16" SA 36 shells with 1/4" SA 36 primary floor and 3/16" SA 36 secondary floor
  • 3/16" SA 36 roof deck c/w toe kick ( common roof primary/secondary )
  • 2 - Roof lifting lugs
  • N1 - 4" 150# RF Inlet
  • N2 - 4" 150# RF HLSD
  • N3 - 2" 150# RF Annulus Drain
  • N4 - 4" 150# RF Truck Out
  • N5 - 3" 150# RF Drain
  • C1 - 4" NPT Coupling Vent
  • C2 - 1" NPT Coupling Annulus Vent
  • C3A/B - 1/2" NPT Couplings Sight Glass leak detection
  • C4A/B - 1" NPT Couplings Level Indicator
  • Standard service pulley system (increment stickers on tank shell - no gauge board)
  • Enardo 330 16oz. thief hatch, sweet service.
  • Shell manway, 24" x 36", c/w bolts, nuts & gasket
  • Ladder c/w safety hoop
  • Skid, Constructed of 8" wide flange beam uprights; 6" wide flange base.
  • Gauge chart
  • Min. 110% containment
  • Air tested to 16 0z.
  • SSPC-SP7-63 Brush Blast, one coat C113 Phenolic primer
Options:
  • 1-1/2" Foam Insulation c/w gauge board
  • 2" Foam Insulation c/w gauge board
  • Firetube & Controls
  • Roof Manway
  • Gaugeboard
  • Sour Thief Hatch & Level Indicator
  • Valve Enclosure & Valving
  • Envirovault w/ Natural Gas Heater & Valves
  • Internal Coating
  • Envirovault, 5' x 5', Weld-In
  • Heater for 5' x 5' Envirovault
  • Caged Safety Ladder
  • Fall Arrest System
400 BBL, Skidded, Slope Bottom
  • 12'-0" diameter x 20'-0" high
  • 3/16" Shell & Roof A36
  • 1/4" Floor A36, Slope bottom design
  • Enardo Model 330 Thief Hatch
  • Ladder c/w Safety Hoop
  • C1 a/b - 1" NPT - Level Indicator
  • C2 - 4" NPT Coupling - Roof Vent
  • C3 - 4" 150# RF Flange - Spare
  • C4 - 4" 150# RF Flange - Truck Out
  • C5 - 4" 150# RF Flange - Truck Out
  • C6 - 4" 150# RF Flange - Truck Out
  • C7 - 4" 150# RF Flange - Drain
  • Std. Level Indicator (increment stickers on tank - no gauge board)
  • 3" Downcomer
  • Skid, Constructed of 8" wide flange beam uprights; 6" wide flange base.
  • Manway 24" x 36" x 3/16", c/w gasket, nuts and bolts.
  • Roof safety toe ring.
  • SP7-63 Brush Blast, (1) coat Cloverdale-Clovacoat C-113 Phenolic Primer - Grey in color
Options:
  • 1-1/2" Foam Insulation c/w gauge board
  • 2" Foam Insulation c/w gauge board
  • Firetube & Controls
  • Roof Manway
  • Gaugeboard
  • Sour Thief Hatch & Level Indicator
  • Valve Enclosure & Valving
  • Envirovault w/ Natural Gas Heater & Valves
  • Internal Coating
  • Envirovault, 5' x 5', Weld-In
  • Heater for 5' x 5' Envirovault
  • Caged Safety Ladder
  • Fall Arrest System
750 BBL Single Wall
  • 15'-6" Dia. x 24'- 0" high
  • Built and tested to API specifications
  • 1/4" flat bottom floor
  • 3/16" shells
  • 3/16" coned roof (2:12 slope)
  • name plate and braket
  • safety toe ring around perimeter of roof
  • sweet service level gauge assembly c/w decal on tank (120m3)
  • ladder with cage
  • 8" Wenco sweet service thief hatch (model #TH8-8) (8 oz vacuum)
  • 24" x 36" API standard manway c/w hinges
  • Tank hauling pads
  • Blast SSPC-SP6, one color, self priming Devoe 349QC polyurethane enamel (6 mils DFT)
  • air / soap leak test to 1.5 psi in accordance with API 12
  • Four 4" 150# RF
  • One 4" 3000# coupling in peak of roof
  • One 3" Half coupling for high level shut down
  • One 8" theif hatch flange
  • Plate is ASTM A36 / 44W
  • Structural is ASTM A36 or A53B pipe
  • Fittings: screwed are A105N 3000#, welded are A234 WPB)
  • Piping is A106B
  • Flanges are A105N
Options
  • 1-1/2" Foam Insulation c/w gauge board
  • 2" Foam Insulation c/w gauge board
  • Heat Coil
  • Firetube & Controls
  • Butterfly Valves
  • Sour Thief Hatch & Level Indicator
  • Envirovault w/ Natural Gas Heater
  • Internal Coating
  • Envirovault, 5' x 5', Weld-In
  • Heater for 5' x 5' Envirovault
  • Caged Safety Ladder
  • Fall Arrest System
1000BBL Single Wall
  • 15'-6" Dia. x 32'- 0" high
  • Built and tested to API 12F specifications
  • 1/4" flat bottom floor
  • 3/16" shells
  • 3/16" coned roof (2:12 slope)
  • name plate and braket
  • safety toe ring around perimeter of roof
  • sweet service level gauge assembly c/w decal on tank (170m3)
  • ladder with cage
  • 8" Wenco sweet service thief hatch (model #TH8-8) (8 oz pressure / 0.4 oz vacuum)
  • 24" x 36" API standard manway c/w hinges
  • Tank hauling pads
  • Blast SSPC-SP6, one color, self priming Devoe 349QC polyurethane enamel (6 mils DFT)
  • air / soap leak test to 1.5 psi in accordance with API 12F
  • Four 4" 150# RF
  • One 4" 3000# coupling in peak of roof
  • One 3" Half coupling for high level shut down
  • One 8" theif hatch flange
  • Plate is ASTM A36 / 44W
  • Structural is ASTM A36 or A53B pipe
  • Fittings: screwed are A105N 3000#, welded are A234 WPB)
  • Piping is A106B
  • Flanges are A105N
Options:
  • 1-1/2" Foam Insulation c/w gauge board
  • 2" Foam Insulation c/w gauge board
  • Heat Coil
  • Firetube & Controls
  • Butterfly Valves
  • Sour Thief Hatch & Level Indicator
  • Envirovault w/ Natural Gas Heater
  • Internal Coating
  • Envirovault, 5' x 5', Weld-In
  • Heater for 5' x 5' Envirovault
  • Caged Safety Ladder
  • Fall Arrest System